- 碰撞测试
- 法规测试(CNAS认可项目)
- 企标测试服务
- 非标测试服务
GMW14831-2012 Dynamic Strength
作者：admin 发布时间：2016-12-11 08:52:46 点击率：3007
3.7.3.6.3 Dynamic Strength (Three Point System).
3.7.3.6.3.1 Dynamic Test of Belt Assembly. The belt system shall withstand the ECE R16 section 7.7 Dynamic Test of Belt Assembly or of the Restraint System without failure or fracture of any load carrying parts.
3.7.3.6.3.2 Second Impact Strength. The belt system should withstand the ECE R16 dynamic performance sled test twice, without failure or fracture of any parts. The dummy should be repositioned before the second test without unbuckling the belt or adjusting any parts of the system. If the retractor remains locked and does not retract any loose webbing, the loose webbing can be removed by using a shortening device (e.g., auxiliary spool).
标准安全带动态测试
No.
Measurement description
Test Result List
1st impact strength
Second impact strength
1
Sled velocity [50±1Km/h]
50.47km/h
50.74km/h
2
Dummy
TNO-10 dummy
TNO-10 dummy
3
Test pluse [ECE R16
Appendix 9]
31.89g / 80ms
30.33g / 79.4ms
4
Stowed webbing length
1000mm
1000mm
5
Dummy displacement
Chest displacement
368mm
470mm
6
Velocity at 300 mm
19.178km/h
24.48km/h
7
Pelvis displacement
96mm
132mm
8
Electrically
ignited seatbelt tensioner
TTF=0ms
Null
9
Load
Retractor webbing
axis force
4.441KN
4.326KN
10
Upper shoulder
force
5.031KN
5.400KN
11
Lap belt force
8.343KN
8.949KN
12
Buckle opening force
------N
------N
13
Stop distance [400mm±50mm]
410mm
410mm